General Description
With pre-painted aluminium, the demands of the construction industry can be perfectly fulfilled. Highly decorative with excellent insulating properties, weather resistant, ideal for roofing and cladding; functional for interior design and sun protection. Unusual shapes and a wide range of colors for modern architecture are achieved by innovative coating systems and good processing qualities. Pre-painted aluminium ensures safe, high, quality buildings, pleasant to look at – for decades
Applying to Aluminium Composite Panel
Alloy | AA 1100 | ![]() |
Temper | H16/18 | |
Dimensions | Gauge:0.06mm ~ 0.5mm Width:1000mm ~ 1500 mm Length:customize Special dimensions on request | |
Tensile strength Rm[MPa] | 135-185 | |
Elongation | ≥2 |
Applying to Aluminium Honeycomb Composite Panel
Alloy | AA 3003 | ![]() |
Temper | H24 | |
Dimensions | Gauge:0.5mm~ 1.0mm Width:≤1700mm Length:customize Special dimensions on request | |
Tensile strength Rm[MPa] | 135-185 | |
Elongation | ≥2 |
About the paint
IDEABOND pre-painted aluminium used for facade is coil coated with a high-quality PVDF-paint system. Particular, its good workability, the strength of the base material and the coating make IDEABOND ideal for creating facades that match your specific ideas and modern architecture requirements.
Advantages
◆ An invitation to creativity: a wide range of plain, metallic and special colours
◆ Flawless, brilliant and long lasting surfaces due to a high-quality coating
◆ Approved in extreme climates
Surface
Front Face:
IDEABOND has been coil coated with a PVDF paint system (80/20). The paint thickness is approx. 25µm for a two - layer paint system. For special coatings the paint thickness is approx. 40 µm.
Reverse side:
The reverse side of IDEABOND is protected with a transparent lacquer. The thickness of this lacquer is approx. 3 µm. Identification number, DEABOND logo is imprinted underneath the protective lacquer. An arrow indicates the coating direction.
Protective film:
To be protected against damage, IDEABOND is provided with a white, UV-resistant protective foil on the front side. This film poses no risk to ground water and can be recycled. It remains on the panel during installation and can easily be removed once the panels are in place.