General Description
Suspended aluminium ceiling elements of IDEABOND pre-painted aluminium are an established feature of modern interior architecture for many reasons, e.g. for their representative attractive appearance, thermal and sound insulation, integration into ventilation or lighting systems. Suspended ceilings can be found in offices and salesrooms, administrative buildings and covered walls as well as in exhibition halls, airports, service stations or swimming baths.
IDEABOND pre-painted coils are suitable for manufacturing of e.g. ceiling panels, grid ceilings, long panel cassettes, lamp grid elements, capping (aluminium-covered support rails) and substructure rails or partitions.
Smooth or perforated ceiling elements are mounted on substructure. In general, ceilings are installed in closed rooms. They may also be installed in "wet rooms" such as indoor swimming pools if suitable air conditioning prevents persistent condensation.
Features
Polyester lacquer system
Gloss range from low gloss(10~20 gloss) to full gloss(≥80 gloss)
Diversified in variety, extensive choices in color and shade
Good flexibility, adhesion, and formability
Alloy | AA 3005 | |
Temper | H46 | H48 |
Tensile strength | 185 - 225 | 205 - 260 |
Proof Stress | 165 - 205 | 180 - 220 |
Elongation | ≥ 3% | ≥ 2% |
Alloy | AA 3105 | |
Temper | H46 | H48 |
Tensile strength | 175 - 225 | min. 195 |
Proof Stress | min. 150 | min. 170 |
Elongation | ≥ 2% | ≥ 2% |
General Specification | ||
Gauge (incl. paint) | Width | |
Panels and cassettes | 0,40 – 1,00 mm | 80 – 750 mm |
Capping and filling profiles | 0,20 – 0,35 mm | 25 – 80 mm |
Substructure material | 0,80 mm | 80 – 150 mm |
Surface
Front side: 2-coat polyester
The polyester lacquer system insists in two coats (primer and top coat) which is stove-enamelled by the coil coating process. Thickness of paint coating: approx. 18/28 µm (depending on colour tone). Metallic colours are coated with a base coat and a transparent layer.
Reverse side:
protective lacquer
The transparent protective lacquer on the reverse side is suitable for adhesive bonding with most available glues and foams. Typical thickness of paint coating: approx. 3-4 µm.
Protective Film:
A protective film is available on request with self adhesive protective film which can be removed later.