468 is a single-component, acid-curing silicone glazing adhesive designed for the installation of glass doors and windows and the sealing of general building materials, with excellent adhesion and sealing properties. 468 is used with a squeezing gun to squeeze from the sealant cartridge to the part to be sealed, the sealant absorbs the moisture in the air at room temperature and cures into an elastomer to form an effective seal.
468 is a single-component acid curing high performance silicone sealant, high strength, fast curing speed, no white, easy to use.
-Have good weather aging resistance.
-Good elasticity, good adhesive performance to various building materials.
-Installation of all kinds of glass doors and windows
-All kinds of decorative caulking.
-Applicable to professionals for general purpose caulking and sealing.
-Structural bonding of concealed frame and semi-concealed frame glass curtain walls.
-All materials that will ooze grease, plasticizers or solvents.
-Place where ventilation is not tolerated.
-Frosty or wet surfaces.
-Locations subject to continuous water immersion or year-round humidity.
- Metal coated glass assemblies.
-places in contact with substrates such as marble and granite.
-It is not suitable for construction when the surface temperature of the material is lower than 4°C or more than 40°C.
- 468 is packed in 300ml(1×24pcs) plastic tube.
-468 is transparent, silver gray, porcelain white color.
●Storage and expiration date
-468 should be stored in a cool, dry place below 27°C from the date of manufacture. Storage period is 9 months.
-This product is not toxic when fully cured, but contact with eyes should be avoided before curing, if contact with eyes, please flush with plenty of water and seek medical attention; uncured product should avoid contact with children. This product will emit acetic acid during the curing process, attention should be paid to ventilation in the construction and curing area to avoid adverse effects on people due to the concentration of these substances.
-If the sealant seam is broken, replace the damaged part, just use the solvent to remove the accumulated dirt, and then use the sealant.
If the sealant seam is damaged, replace the damaged part by removing the accumulated dirt with solvent and fill it with sealant.
-It is the customer's responsibility to test the proposed sealant application accordingly and determine if the performance meets the customer's application requirements.
You have no items to require